Thermotec Inverter Wifi Module

Description

Thermotec Inverter Wifi Module

The wifi module can be added to any of the Thermotec Inverter range of pool heat pumps.

new-wifi-module-with-4-leds-pic2

This is the newer type of wifi module

There are two versions of the wifi module:-

thermotec inverter wifi module new-wifi-module-with-4-leds-pic2
 Older Wifi Module with 1 LED (Before Aug 2020)

Uses the Inverter Temp App

 New Wifi Module with 4 LEDs (After Aug 2020)

Uses the Aqua Temp App

The Aqua Temp  App is available for both Android and iPhone

The Wi-Fi module simply connects to the heat pump via the supplied y-cable

The module is then joined to your wi-fi network to allow it to communicate with the internet

The wifi module also allows HeatPumps4Pools to provide remote monitoring and support of your heat pump with the ability to change any settings if required. This greatly enhances the speed and efficiency of our technical support.

The Aqua Temp app can then be installed into your smart phone to give full remote control and monitoring of your pool heat pump.

aqua-temp-app Using the app you can:-

  • Turn the heat pump on and off
  • See the current pool water temperature
  • Alter the desired pool set temperature
  • Set the timer
  • Change the mode of the heat pump from heating, cooling and auto modes
  • Put the heat pump in and out of silence mode (e.g. for night-time use)
  • Show the weather temperatures and information
  • Display any error codes and messages

By entering a password, more detailed information can be seen including:-

  • Incoming and outgoing water temperatures
  • Compressor speed
  • Fan speed
  • Running current
  • and much more….
The Thermotec Inverter Aqua Temp App

Note: A a wifi signal is required at the location of the heat pump in order for the wifi module to be able to connect to your wifi.

Please test the strength of the wifi signal eg with a laptop or your smart phone before purchasing the wifi module.

If you do not have a wifi signal at the heat pump’s location, then you can either:-

  1. Use a wifi signal extender to boost the signal in the area of the heat pump
  2. Use power LAN adaptors plugged into mains sockets in the house and the pool shed. You can then connect a wifi extender to the powerlan adaptor in your pool shed to deliver wifi to the wifi module.
  3. Purchase the Thermotec Inverter 3G/4G Mobile Data Module (DTU) which uses the mobile data network

Please Contact Us if you need assistance with the wifi configuration

Please also see the YouTube video and user manual for the Wi-Fi module below for more information and installation instructions

Installation

For installation of the module, please see our YouTube video

How to install the wifi module on the Horizontal Thermotec Inverter swimming pool heat pumps

Product Literature

Please click the links below to download pdf brochures for these products

Thermotec Inverter Wi-Fi User Manual – Inverter Temp App (Before Aug 2020)
Thermotec Inverter Wi-Fi User Manual – Aqua Temp App (After Aug 2020)

 

Assistance?

If you need any assistance or advice please Contact Us

Payment

We accept all major credit and debit cards, Bank Transfer (BACS) and Paypal

All major credit cards accepted

Paypal Credit

paypal credit banner

For details of PayPal Credit please click here: PayPal Credit

Delivery

The prices shown include FREE UK delivery for orders over £50 or £6.50 for orders under £50

We can ship to any country. Please contact us for a shipping quote.

The lead time on most items is normally on a 1-2 day delivery,  subject to availability. Please call to check availability.

Product Literature

Please click the links below to download pdf brochures for these products

Thermotec Inverter Wi-Fi User Manual – Inverter Temp App (Before Aug 2020)
Thermotec Inverter Wi-Fi User Manual – Aqua Temp App (After Aug 2020)

 

Corona Virus Update

Despite the UK lockdown, we are open and operating as normal.

Our phone lines are open, please call us, use our online chat facility, or email us