Sunspring Swimming Pool Heat Pump for Above Ground Pools 5kw to 14kw

THE SUNSPRING RANGE REPLACE THE ECO+ MODELS WHICH ARE NOW DISCONTINUED. THE SUNSPRING HEAT PUMPS HAVE IMPROVED DESIGN, NEW FAN MOTORS AND INCREASED HEAT OUTPUT FOR THE SAME BARGAIN PRICE.

THESE HEAT PUMPS ARE NOW IN STOCK TO SHIP IMMEDIATELY ON A NEXT DAY COURIER SERVICE - ORDER NOW WHILE STOCKS LAST.

The SunSpring Swimming Pool Heat Pumps are a brand new range exclusively from HeatPumps4Pools

The Sunspring heat pumps are a new heat pump range

They are ideal for above ground pools or small in ground pools

They are quick to setup and remove in the winter

Comes complete with 3.5m cable and UK plug/RCD (except Sunspring 14) and also flexible hose connections so you can be up and running to heat your pool in no time !

We can also supply these with an EU 2-pin plug/RCD if required

Sunspring 05 and Sunspring 07	Sunspring 10 and Sunspring 14

1. SunSpring Features

• Plug and play with fitted cable, UK 3-pin (or Euro 2-pin if preferred) plug and RCD 
• Specially designed for small and medium Pools (thin wall pools, polyester, metal or wooden wall pools <45m3)
• Comes with hosetail connections to allow easy connection of flexible pool hose for above ground pools.
• Includes stepped hosetails to accept both 1.5" (38mm) or 1.25" (32mm) pool hose.
• Also includes glue socket connectors for 50mm and 1.5" solid pool pipe.
• Will continue to function even at low flow rates
• Can be used with sand or catridge filters
• Requires an air temperature of +8°C and above to operate
• An exceptionally high COP value (5) for such a small compact heat pump.
• Easy and fast to install (<15 min). Plug and play
• User friendly, easy to use colour display with 3 buttons
• Water flow scale to show water flow rate through the heat pump
• Safety RCD protection and UK or Euro plug - Plug & play (Note: SunSpring14 needs to be hard wired to a dedicted breaker)
• Comes with long 3.5m power cable
• Using sustainable materials (UV resistant Polymer casing and titanium heat exchanger)
• Full Flow Technology -  No Bypass needed
• Uses R410a refrigerant gas for an environmentally friendly operation
• Plastic rust-resistant polymer casing
• Note: The Sunspring units do not have a built in flow switch and so must not be allowed to run with no water running through them. We sell a time clock which can be used to turn the unit on/off at specific times if required.

2. SunSpring Sizing Guide

Please use the chart below to select the best SunSpring heat pump model for your pool

However please note that these are the maximum sizes. You should always oversize a heat pump, so we recommend that you choose the next model up in the sizing chart.

If in doubt about the model required for your pool, then please contact us and we will be happy to assist

3. Easy Installation

The SunSpring Swimming Pool Heat Pumps are designed for quick and easy setup and operation.

They come complete with UK (or Euro), RCD/plug and flexible hose connections to suit most above ground pools

Note: The SunSpring05, SunSpring07 and SunSpring10 come with a pre-fitted UK or Euro plug/RCD. The SunSpring14 exceeds the capacity of a standard UK 13A plug and so we recommend that the SunSpring14 is hard wired to its own 20A Type-D breaker.

Please read the PDF installation manual below for more information on how to install the SunSpring swimming pool heat pumps

4. Easy to Operate

The SunSpring swimming pool heat pumps have a user friendly colour digital display panel

The display panel has three buttons for easy operation

The display has a unique water flow indicator scale to instantly show the water flow rate through the heat pump so that you can be sure that it is sufficient.

The display shows the current pool temperature and the set temperature.

5. SunSpring Specifications

The specification data for the SunSpring range of heat pumps is:-

6. Fitted with UK or Euro Plug

All of our Sunspring heat pumps are fitted with a UK 3-pin mains plug/RCD.  

We can also supply them with a 2-pin euro plug on request

Comes with UK 3-pin plug/RCD (shown above)	Optional Euro 2-pin plug/RCD shown above (available on request)

If your outdoor socket is already protected by an RCD, then if you prefer, the fitted RCD/Plug can be unwired and replaced with a standard UK 13A plug. 

Note: The Sunspring heat pumps require a 220v or 240v, 50hz power supply and therefore are not suitable for use in the USA/Canada (which uses a 110v, 60hz power supply)

7. Pricing and Delivery

Prices include VAT and FREE delivery to most UK postcodes. (excludes Scotland and some UK postcodes).

We can deliver the SunSpring heat pumps to any country - please contact us for a shipping quote.

All SunSpring heat pumps are normally in stock and will be delivered in approx 1-2-days from cleared payment

8. Payment

We accept all major credit cards, cheques and Bank Transfer

Note: We offer an additional 1% discount on these prices for payment by debit card or bank transfer. Just choose bank transfer or debit card as the payment type when you complete the checkout process.

9. Installation

Installation is very quick straightforward. We can provide advice on installing your heat pump. We can also offer an installation service if required.

The Sunspring heat pumps come with stepped hosetails to allow easy connection of either 38mm (1.5") or 32mm (1.25") flexible hoses

Please see our Installation pages for photographs of examples of pool heat pump installations and also the FAQ pages for more information

10. Warranty

All SunSpring products come with the following warranty:-

• 2-years parts warranty on all components in the UK
• 2-years parts warranty on all components in Europe
• Warranty subject to the unit being installed in accordance with manufacturer's instructions.

11. Product Literature

Please click the links below to download pdf brochures for the Sunspring products

SunSpring Brochure
SunSpring User Manual

12. Customer Video

Please view the video which was kindly sent in by one of our customer with an Sunspring heat pump on an above ground pool.

13. Customer Feedback

"I am delighted with the SunSpring pool heater, which I have running beside my above-ground 12' x 24' Intex pool holding 30,000 litres.

A few details for your interest:

I run the heater between 8 a.m. and 5 p.m. every day. The pool heater is costing me around £50 per month to run - a pretty reasonable outlay, in my view.

I set the pool heater up on May 5th 2014. The water temperature was initially 14.5 C and within about four days it was up to 22 C. I use a solar pool cover at night and the water pipes to and from the pool are insulated with black pipe insulation.

I have attached a few pics. (zip file) which you are welcome to use on your website if you wish.

Kind Regards

Mike Garwood"

To see more customer feedback, please visit our Feedback page

14. Water Flow Rates

Please check that your existing pump and filter will deliver the flow rate required for the SunSpring heat pump.

If your pump and filter are too small, then we sell the Krystal Clear pump and filter sets with higher flow rates to suit the SunSpring heat pumps

Please Click Here to see pricing for these pump and filter sets

15. Automatic Time Clock

If you would like to automatically turn on and off the SunSpring pool heat pumps, then we also sell heavy duty time clocks which are suitable

Note: The Sunspring heat pumps do not have a built in flow switch and so must not be allowed to operate without water flowing through the unit. 

16. Pool Hose

You may need to purchase an additional length of pool hose to connect from your heat pump to the pool

We sell both 1.5" and 1.25" pool hose

17. Bypass Kit

If you do not plan to drain your pool in winter, we recommend using a bypass kit.

This allows you to isolate the heat pump and drain it down whilst keeping the water in the pool

We sell a bypass kit for above ground pools which comes complete with hosetails, short lengths of pipe and glue etc

Please Click Here for more details and pricing or see our Accessories section

18. Assistance?

If you need any assistance or advice as to which model would be best for your pool, please email us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

for all enquiries, please contact us at enquiries@heatpumps4pools.com

19. How to Calculate Your pool Water Volume

You can easily calculate the water volume in your pool as follows:-

Round Pools

To calculate the volume of a round pool, you can use the formula

Pool Volume = 3.14 x radius x radius x depth

1. Measure the diameter of the pool in metres
2. Half the diameter to give the radius of the pool
3. Multiply 3.14 x radius x radius x pool depth

Example

A 12' (3.66 m) diameter round above ground pool with a depth of 0.8m

Diameter = 12' x 0.305 = 3.66m

Radius = 3.66 / 2 = 1.83m

Volume = 3.14 x 1.83 x 1.83 x 0.8m = 8.4 m3

The Hot Splash supports pools up to 10m3 so would be ok for this pool

Rectangular Pools

Pool volume = length x width x depth

Example

6m x 4m pool, 0.8 m deep = 6 x 4 x 0.8 = 19.2 m3