The Eco+ Swimming Pool Heat Pumps are a brand new range exclusively from HeatPumps4Pools
The Eco+ heat pumps are a new heat pump range
They are ideal for above ground pools or small in ground pools
They are quick to setup and remove in the winter
Come complete with UK or Euro plug/RCD (except Eco+14) and flexible hose connections so you can be up and running to heat your pool in no time !
Eco+4 and Eco+6
Eco+9 and Eco+14
Fitted UK or Euro plug and RCD and hose connections for above ground pools
Specially designed for small and medium Pools (thin wall pools, polyester, metal or wooden wall pools <45m3)
Will continue to function even at low flow rates (low flow rates arise if the filter is polluted)
Can be used with sand filters
Can be used with cartridge filters
Requires an air temperature of +8°C and above to operate
An exceptionally high COP value (5) for such a small compact heat pump.
Easy and fast to install (<15 min). Plug and play
User friendly. Color display 3 buttons Flow indication
Safety RCD protection and UK or Euro plug - Plug & play (Note: Eco+14 needs to be hard wired to a dedicted breaker)
Comes with long 3.5m power cable
Using sustainable materials (UV resistant Polymer casing and titanium heat exchanger)
Full Flow Technology No Bypass needed
With R410a gas for an environmentally friendly operation
Plastic rust-resistant polymer casing
Eco+ Sizing Guide
Please use the chart below to select the best Eco+ heat pump model for your pool
Pool Sizing Guide
Max Pool Volume
However please note that these are the maximum sizes. You should always oversize a heat pump, so we recommend that you choose the next model up in the sizing chart.
If in doubt about the model required for your pool, then please contact us and we will be happy to assist
Eco+ Swimming Pool Heat Pumps are designed for quick and easy setup and operation.
They come complete with UK or Euro, RCD/plug and flexible hose connections to suit most above ground pools
Note: The Eco+4, Eco+6 and Eco+9 come with a pre-fitted UK or Euro plug/RCD. The Eco+14 exceeds the capacity of a standard UK 13A plug and so we recommend that the Eco+14 is hard wired to its own 20A Type-D breaker.
Please read the PDF installation manual below for more information on how to install the Eco+ swimming pool heat pumps
Easy to Operate
The Eco+ swimming pool heat pumps have a user friendly colour digital display panel
The display panel has three buttons for easy operation
The display has a unique water flow indicator scale to instantly show the water flow rate through the heat pump so that you can be sure that it is sufficient.
The display shows the current pool temperature and the set temperature.
The specification data for the Eco+ range of heat pumps is:-
Pricing and Delivery
Prices include VAT and FREE delivery to most UK postcodes. (excludes Scotland and some UK postcodes).
We can deliver the Eco+ heat pumps to any country - please contact us for a shipping quote.
All Eco+ heat pumps are normally in stock and will be delivered in approx 3-days from cleared payment
We accept all major credit cards, cheques and Bank Transfer
Note: We offer an additional 1% discount on these prices for payment by debit card or bank transfer. Just choose bank transfer or debit card as the payment type when you complete the checkout process. Installation
Installation is very quick straightforward. We can provide advice on installing your heat pump. We can also offer an installation service if required.
Please see our
Installation pages for photographs of examples of pool heat pump installations and also the FAQ pages for more information Warranty
AllEco+ products come with the following warranty:-
2-years parts warranty on all components in the UK
2-years parts warranty on all components in Europe
Warranty subject to the unit being installed in accordance with manufacturer's instructions.
Please click the links below to download pdf brochures for
the Eco+ products
Please view the video which was kindly sent in by one of our customer with an Eco+ heat pump on an above ground pool.
VIDEO Customer Feedback
"I am delighted with the Eco+9 pool heater, which I have running beside my above-ground 12' x 24' Intex pool holding 30,000 litres." A few details for your interest: I run the heater between 8 a.m. and 5 p.m. every day. The pool heater is costing me around £50 per month to run - a pretty reasonable outlay, in my view. I set the pool heater up on May 5th 2014. The water temperature was initially 14.5 C and within about four days it was up to 22 C. I use a solar pool cover at night and the water pipes to and from the pool are insulated with black pipe insulation. I have attached a few pics. (zip file) which you are welcome to use on your website if you wish. Kind Regards Mike Garwood
To see more customer feedback, please visit our
Water Flow Rates
Please check that your existing pump and filter will deliver the flow rate required for the Eco+ heat pump.
If your pump and filter are too small, then we sell the Krystal Clear pump and filter sets with higher flow rates to suit the Eco+ heat pumps
Please Click Here to see pricing for these pump and filter sets Automatic Time Clock
If you would like to automatically turn on and off the Eco+ pool heat pumps, then we also sell heavy duty time clocks which are suitable
You may need to purchase an additional length of pool hose to connect from your heat pump to the pool
We sell both 1.5" and 1.25" pool hose
If you do not plan to drain your pool in winter, we recommend using a bypass kit.
This allows you to isolate the heat pump and drain it down whilst keeping the water in the pool
We sell a bypass kit for above ground pools which comes complete with hosetails, short lengths of pipe and glue etc
Click Here for more details and pricing or see our Accessories section Assistance?
If you need any assistance or advice as to which model would be best for your pool, please email us
for more information, also see our
All items sold in accordance with our
terms and conditions
for all enquiries, please contact us at
email@example.com How to Calculate Your pool Water Volume
You can easily calculate the water volume in your pool as follows:-
To calculate the volume of a round pool, you can use the formula
Pool Volume = 3.14 x radius x radius x depth
Measure the diameter of the pool in metres
Half the diameter to give the radius of the pool
Multiply 3.14 x radius x radius x pool depth
A 12' (3.66 m) diameter round above ground pool with a depth of 0.8m
Diameter = 12' x 0.305 = 3.66m
Radius = 3.66 / 2 = 1.83m
Volume = 3.14 x 1.83 x 1.83 x 0.8m = 8.4 m3
The Hot Splash supports pools up to 10m3 so would be ok for this pool
Pool volume = length x width x depth
6m x 4m pool, 0.8 m deep = 6 x 4 x 0.8 = 19.2 m3