Elecro Evo Electric Pool Heaters

Elecro EVO Electric Pool Heaters

To see the prices of these heaters - please scroll to the bottom of this page..

Whilst electric heaters are not as energy efficient to run as heat pumps, they can be useful to act as backup or booster heaters to heat pumps.

Indoor pools and koi ponds can use an electric heater in conjunction with a heat pump.

In extremely cold weather, the heat pump may not produce sufficient heat to maintain the desired water temperature. An electric heater can be set to turn on under these conditions to boost the water temperature back to the desired level.

Our Elecro EVO heater have the following features:-

• Titanium elements
• Reversible flow switch
• No pump interlock is required
• 3-9kW comes with fitted 1.5’’ adaptors and hosetails
• 12-18kW come with 1.5’’ socket unions
• Ideal for Premium Wooden and Intex style above ground pools
• Fully controlled with Schneider contactor for super safe operation
• Robust, durable construction
• Ultra-reliable flow switch allows safe operation as low as 1m³/hour
• Control thermostat 0-40°C (1°C differential)
• Safety thermal cut our 60°C (manual reset)
  

The Elecro EVO pool heater is manufactured from top quality components and material at the Elecro works in Hertfordshire, England.

Construction consists of a flow tube which is fitted with inlet and outlet mouldings manufactured from specially formulated polymer alloy material. The outlet moulding accommodates a reversible flow switch (allowing water input from wither direction) with a gold tipped reed switch and Titanium fulcrum pin. The inlet moulding has been designed to ensure full immersion of the elements, greatly reducing the risks of air locking.

The heater is supported on two swivel feet; these can be rotated to permit either wall or floor mounting. The heater control components are positioned on the front face of the electrical enclosure.

Sizing Guide

The guide for sizing these heaters is 1.5kw per 1000 gallons of pool or pond water.

Operation

The desired pool temperature can be easily selected on the EVO heater using the panel-mounted thermostat dial. The single or three-phase power is supplied through a top quality Schneider contactor. Safety and equipment protection is provided by the highly reliable flow switch. Over-temperature protection is provided by the thermal cut out (manual reset).

Specification

Minimum Flow Requirement 3-kW > 6-kW	1m³ (1,000-litres) per hour
Minimum Flow Requirement 9-kW > 24-kW	4m³ (4,000-litres) per hour
Maximum Flow Velocity (All Outputs)	17m³ (17,000-litres) per hour
Heating Elements	Incoloy 825 or Titanium
Flow Tube	BS 316 Stainless Steel or Titanium
Control Thermostat	0ºC > 40ºC (1.0ºC Differential)
Safety Thermal cut-out	55ºC (Manual reset)
Flow Switch	Gold tipped reed switch with Titanium fulcrum pin
Wiring	High temperature, silicone sheathed, multi-strand copper conductors
Contactor
Seals	High temperature special formula polymer
Working Pressure	4 bar maximum
Water Connections	1½" BSP female thread
Supplied ABS Unions	For 1½" / 50-mm rigid pipe
Supplied Hosetails	For 1½" / 1¼" flexible pipe
Mounting	Floor or wall mountable

Single Phase Models

Power Output	Load (Amp)	Stainless Steel Flow Tube With Titanium Heating Elements	Dimension 'L'	Wiring Diagram
3-kW	13	8T83	462-mm	View
4.5-kW	20	8T84	462-mm	View
6-kW	27	8T86	462-mm	View
9-kW	40	8T89	462-mm	View
12-kW	53	8T8A	462-mm	View
15-kW	66	8T8B	592-mm	View
18-kW	79	8T8C	592-mm	View

3-Phase Models

EVO Versatile  400V 3 Phase Models & Product Codes

Power Output	Load (Amp)	Stainless Steel Flow Tube With Titanium Heating Elements	Dimension 'L'	Wiring Diagram
6-kW	27 / 9	8T36V	592-mm	View
9-kW	40 / 13	8T39V	592-mm	View
12-kW	53 / 18	8T3AV	592-mm	View

Power Output	Load (Amp)	Stainless Steel Flow Tube With Titanium Heating Elements	Dimension 'L'	Wiring Diagram
15-kW	22	8T3B	592-mm	View
18-kW	26	8T3C	592-mm	View
24-kW	35	8T3D	592-mm	View

Custom Models

We can also custom make one of these heaters to any specification for you.

Product Literature

Please click the links below to download pdf brochures for Elecro heaters

 

Elecro Heater Brochure
Eleco Heater User Manual