Duratech Dura+ Plus 7kw Swimming Pool Heat Pump Heater

The Duratech Dura+ Plus Range of Swimming Pool Heat Pumps from HeatPumps4Pools provide enhanced performance over the standard Dura range.

Note that these heat pumps are genuine Duratech heat pumps. Beware of imitation products on the market of lower quality.




 Duratech products are assembled in Europe using quality components.

The Duratech Dura Plus Swimming Pool Heat Pumps supplied by HeatPumps4Pools have the following features:-

(the differences from the standard Duratech range are highlighted in bold)

• High efficiency by using R410a refrigerent gas
• COP (Coefficient of Performance) of up to 6
• Operate down to -15C degrees
• Can Heat and Cool the water
• Dual speed fan for extra energy efficiency and reduced noise
• Suitable for Koi ponds as well as swimming pools
• Hot gas defrost cycle to allow operation at lower temperatures
• Titanium heat exchanger - The use of titanium for the heat exchanger leads to efficient heat transfer without any dangers of corrosion.
• Digital control panel on all models
• Green UK & European compliant extra efficient refrigerant gas (R410a)
• Plastic ABS corrosion resistant casing
  
• Refrigerant gas pressure gauge
• 2-Year parts and labour warranty
• Designed & Built For Long Life & Reliability

Using high quality materials in the build of the Duratech Heat Pump and a titanium heat exchanger means it is practically "Bullet-Proof" to erosion from Chlorine, Bromine or Salt in the water. Also, the heat exchanger is oversized to improve efficiency and make the Duratech Heat Pump even more cost effective and great value for money.

Dura+ units are often used to heat koi ponds through the winter due to their ability to operate down to -15C

Easy Installation

The Duratech Swimming Pool Heat Pump is designed intelligently and exceptionally compact for ease of installation. One of the simple but handy design additions on the Duratech Heat Pump is the integrated flow switch which will sense the water flow and automatically start the heater when the pool pump starts and stop it when the pump shuts off. Simple, but very handy. Also the larger sizes, Dura+22T and Dura+30T come in 3-Phase.

State Of The Art Control

The integrated microprocessor in the Duratech Swimming Pool Heat Pump monitors all the sensors and controls the device without any intervention needed by the user. Electronic display and control with easy operation is standard on all Duratech Swimming Pool Heat Pumps.

Quiet Running

The Duratech Heat Pumps use of a highly efficient, low sound compressor, a low noise fan and an oversized heat exchanger on every unit, makes the Duratech Heat Pump extremely quiet in operation. The DURA+10 at 1m distance creates only 51dB(A) and at 10m distance gives only 32 db(A).

The Dura+ range have two speed fan motors resulting in quieter and more energy efficient operation

Digital Controls

Dura+ Models

The New range Duratech  Dura Plus models are:-

 

Duratech Dura Plus Models

Model	Electrical Power	Heat Output BTUH	Heat Output  Kw	COP (at 25c)
Dura+7	Single phase 50hz	23,900	7kw	5.8
Dura+10	Single phase 50hz	33,450	9.8kw	5.7
Dura+14	Single phase 50hz	48,500	14.3kw	5.8
Dura+19	Single phase 50hz	66,500	19.6kw	5.7
Dura+22T	3-phase 50hz	76,700	22.5kw	5.8
Dura+30T	3-phase 50hz	105,000	31kw	5.9

 

 

 

 

 

 

 

Prices include delivery to most UK postcodes. (excludes Scotland and some UK postcodes).

NB: We offer a 1% discount on all heat pumps for payment by debit card, bank transfer or cheque. Just choose one of these payment types when you checkout.

All Duratech products are normally in stock and will be delivered in approx 3-days from cleared payment

New Duratech Dura +  Range Specifications

What size heat pump do I require for my pool?

For an outdoor pool in the UK that is kept covered, use the following Duratech guide:-

Duratech Dura Plus Sizing Guide

Model	Max Pool Volume
Dura+7	30m3
Dura+10	40m3
Dura+14	60m3
Dura+19	80m3
Dura+22T	95m3
Dura+30T	130m3

However please note that these are the maximum sizes. You should always oversize a heat pump, so we recommend that you choose the next model up in the sizing chart.

Many factors can affect the sizing of a heat pump for your pool. You are therefore strongly advised to contact us to get an accurate sizing recommendation for your particular pool.

Pricing

The manufacturer has asked that we do not list Dura+ prices on the Internet.

Therefore please contact us for a very competitive price

Payment

We accept all major credit and debit cards, cheques and Bank Transfer

Note: We offer an additional 1% discount on these prices for payment by debit card or bank transfer.  Just choose bank transfer or debit card as the payment type when you complete the checkout process.

Installation

Installation is straightforward. We can provide advice on installing your heat pump. We can also offer an installation service if required.

Please see our Installation pages for photographs of examples of pool heat pump installations and also the FAQ pages for more information

Warranty

All Duratech products come with the following warranty:-

• 2-years parts and labour warranty on all components in the UK
• 2-years parts only warranty on all components in Europe
• Warranty subject to the unit being installed in accordance with manufacturer's instructions.

See the warranty document PDF below

Product Literature

Please click the links below to download pdf brochures for Duratech products

Duratech Dura Plus Brochure
Duratech Warranty
Duratech Dura+ User Manual
Duratech Dura+ R410a COP Performance graph

Assistance?

If you need any assistance or advice as to which model would be best for your pool, please email us

for more information, also see our FAQs page

All items sold in accordance with our terms and conditions

for all enquiries, please contact us at enquiries@heatpumps4pools.comh