Meaco 800i Range Pool Dehumidifiers

The Meaco 800i range of pool dehumidifiers represent an excellent balance of value for money and quality.

They are designed for larger sized pool rooms with a pool surface area of up to 157 m2 (assuming the pool is covered when not in use).

It can be floor mounted or through the wall. The floor mounted model can have optional LPHW for air heating from a boiler.



The Meacon units are made within the European union to high quality standards. Each unit is tested before leaving the factory.

Key Features

• Floor or through the wall mounting
• Designed for swimming pools
• Built-in humidistat
• Rotary Compressor
• Huge extraction rate
• Low noise level
• Optional wireless humidistat
• Optional LPHW heating
• Rotary compressor
• Three layer anti-rust coating

The dehumidifiers can either just dehumidify the air, or they can also heat the air. In order to heat the air in the pool room, you can use an existing boiler (eg gas or oil) to provide LPHW (low pressure hot water) to the unit.

As the unit dehumidifies the air, it will then also heat it using the heat supplied by the LPHW supply. 

The units can be located in the pool hall on the floor.

They can also be located inside a plant room using the "through the wall model".

They extract about 148 litres of water per day

• Air delivery 740m3 per hour.
  
• Power consumption 1700W.
  
• Noise level 46dba.
  

Available Models

The dehumidifiers are available in several types:-

1. Floor Wall mounted - metal case
   
2. Floor Wall mounted - metal case with LPHW  to provide air heating
3. Through the wall model

Remote humidistat

For greater accuracy we recommend the use of our remote radio humidistat which allows you to position the relative humidity and temperature sensor in the furthest corner of the pool hall. This takes regular readings of the conditions and sends a radio signal back to the receiver inside the dehumidifier which then reacts accordingly. This method ensures that the pool room is dried evenly and
avoids mould growth in cold spots.

Specifications

Extraction rate at 30°C and 80%rh	148 litres per day
Humidistat	Yes, electronic with display
Continuous drainage option	Yes
Timer	No
Electronic controls	Yes
Auto restart	Yes
Air Filter	No
Noise level	46dBa
Power Supply	Normal British 230V, 50Hz
Average Power Consumption	1700W
Total heat delivered to the air	2800W
Nominal running	8.5amps, protection required 16 amps
Condensate drain	16mm diameter
Air Flow	740 cubic metres per hour
Operating Temperatures	15....35°C
Refrigerant	R407C
Tank	Continuous drainage only
Dimensions (HWD) mm	950 x 1250 x 310mm
Weight	96Kgs
Optional Extras
LPHW	Output 4kW (90/70°C - water temp in/out)
Total heat outputLPHW & dehumidifier combined	6.8kW
Wireless humidistat	Yes - see a photo here
Wireless humidistat with readout	Yes - see a photo here
Through wall mounting	Yes
Floor mounting	Yes

Sizing

As a guide as long as the air temperature is 2°C warmer than the water temperature and you use a cover then the 800i can control a pool with a surface area of 157 square metres.

Brochure

The manufacturer's brochure can be downloaded using the link below:-

Meaco Dehumidifier Brochure